Add: No.818, 2rd Road, 4th Lane, Binhai Industrial Zone, Wenzhou, Zhejiang,China.
Powered by www.300.cn 浙ICP备14011465号-1 Zhejiang Taikang Evaporator Co., Ltd
MVR Stainless Steel 316L Crystallization Evaporator
MVR Continuous Crystallization Evaporator
MVR is the abbreviated form of the mechanical vapor recompression. This is a technology that recovers the energy of the secondary vapor it generates and therefore reduces the demand for external energy. As early as in 1960s, Germany and France have applied this technology successfully to chemical, pharmaceutical, paper-making, waste water treatment and desalination fields.
MVR Technical Principle:
When mechanical vapor is recompressed, the mechanically driven compressor will compress the secondary vapor generated by the evaporator to form a higher pressure. In this sense, the compressor acts as a heat pump to increase energy to the vapor. In another word, in this process, the low-temperature vapor is compressed by the compressor to improve its temperature and pressure and increase its enthalpy and then flow into the heat exchanger for heat exchange and condensation so as to make use of the latent heat of the secondary vapor. Except machine startup, no generation of additional vapor is required during the entire evaporation process.
MVR Continuous Crystallization Evaporator:
A MVR Continuous Crystallization Evaporator comprises MVR system and crystallization system. The crystallizer was proposed by a Norwegian named Jeremiassen in 1930s, which is often called Krystallizer or size-grading crystallizer.
After entry into the system, the liquid flows into the evaporator by means of the circulating pump and is heated to evaporate; the gas then enters into the evaporation chamber; the concentrate seperated from the secondary vapor is delivered through the central down-line to the bottom where crystals grow and then passes upwards through the crystal fluid bed to avoid over saturation. In ding so. Crystals in the crystal bed grow and are discharged from the outlet when their sizes meet the required ones.
The secondary vapor increases its temperature and pressure through MVR system and is then recovered for subsequent uses. This design makes full use of the latent heat during evaporation and therefore achieves the energy-saving goal.
1. Low energy consumption, low operating costs.
2. Small space occupation.
3. Require fewer public utilities and less total investment.
4. Stable operation and high degree of automation.
5. Require no primary steam.
6. Short retention time due to frequently used single effect.
7. Simple process, high practicability and excellent service performance at some loads.
8. Low operation costs.
9. Capable of evaporating at and below 40 degree without refrigerating plant and particularly suitable for heat sensitive materials.
Design and Function:
Vapor compressor currently used for MVP technology has two forms:the positive displacement type and the centrifugal type
Among positive displacement compressors,the most commonly used compressor is the Roots compressor which compresses gas by bringing two or three lobed rotors to relative motions in the cylinder.This kind of compressor keeps two rotors engaged with each other by relying on synchromesh gears located on the rotor axle ends;the curved surface of each concave on the rotor,together with the inside wall of the cylinder,forms a working displacement,which carries away the gas from the gas suction port during rotor rotation,when the carried gas moves to the vicinity of the exhaust port,the pressure in the working displacement will abruptly pick up at the moment,It is to connect with the exhaust port due to the return of gas at higher pressure,and the gas then is delivered to the exhaust passage.This compressor has a large pressure ratio and a small sucking rate.
Centrifugal compressors provide gas energy by means of high-speed rotation of impeller blades.In these compressors,the gas is accelerated and then passes through the diffuser at downstream of the impller to decelerate.In doing so,the kinetic energy is transformed into pressure energy.According to the direction of fluids passing through the impller ,these compressors are named axial flow,mixed flow,or centrifugal compressors respecitively.They are renowed for large pressure ratio,big flow rate,and good stability.
Whichever is the most suitable compressor depends on specific operating conditions and the economy of the entire system.Critical parameter s include the pressure rise to be achieved and volume flow of steam to be compressed.
Corresponding parameter set not found, please add it in property template of background
MVR Mechanical Vapor Recompression Evaporator 01
MVR Forced Circulation Evaporator
National Free Hotline